CE Certification Aluminum Slitting Machine Manufacturer & Supplier

We manufacture complete turnkey coil processing lines: high-precision rotary slitting lines, cut-to-length lines (CTL), high-speed flying shear lines, multi-roll leveling machines, strip straightening units, and continuous galvanizing equipment. Every machine is available either as a fully integrated turnkey plant installation or as modular standalone units for retrofitting and upgrading legacy factory setups.

Our lines process pure aluminum and cold-workable aluminum alloys (1000 through 8000 series, including soft 1050/1100, temper-rolled 3003/5052, and high-tensile aerospace 6061/7075). In addition, Jianfa equipment efficiently slits hot-rolled carbon steel, cold-rolled sheets, galvanized coil (GI/HDG), silicon electrical steel, and surface-critical stainless steel grades (200, 300, and 400 series) with thickness ranges spanning from ultra-thin 0.1 mm foils up to 16 mm heavy plate.

Select a Slitting Line when the ultimate downstream requirement is narrow recoiled strip packages intended for progressive stamping, continuous tube mills, or roll forming operations. Select a Cut to Length Line when you need completely flattened, precision-measured rectangular sheets stacked for fabrication, panel bending, or laser cutting. Select a Flying Shear Line when ultra-high volumetric throughput of rectangular sheets is needed, since the shear knife synchronizes directly with non-stopping, continuous strip motion.

To prepare an accurate engineering quotation, provide: material grade and yield/tensile strength range (MPa); minimum and maximum coil thickness and width; outer and inner coil diameters; maximum mother coil weight; finished strip count and slit width tolerances; edge-burr limits; target operational line speed (e.g., 80 m/min, 150 m/min, 200 m/min); and your plant's factory electrical supply (voltage, frequency, and local compressed air availability).

All Jianfa export equipment complies rigorously with European Machinery Directive 2006/42/EC, Low Voltage Directive 2014/35/EU, and Electromagnetic Compatibility (EMC) Directive 2014/30/EU. We issue genuine Declarations of Conformity verified by third-party notified bodies. Our certified mechanical and electrical field engineers travel directly to buyer locations globally for foundation checking, anchoring, wiring, system commissioning, line tuning, and certified local operator training.

Yes. We strongly encourage client engineers and third-party inspectors (e.g., SGS, Bureau Veritas, TÜV) to visit our 40,000 m² factory in Wuxi, Jiangsu. We conduct comprehensive Factory Acceptance Tests (FAT) using actual customer trial coils to verify blade precision, running tolerances, safety emergency reaction times, and mechanical sound levels before wooden maritime export packing and port dispatch.