CE Certified Line
CE Certification Manufacturer Of Cut to Length Line
Integrated leveling, measuring, and high-precision shearing system designed for uniform sheet stacking with zero surface damage.
View Product Details
Primary Engineering Lines
Featured CNC Slitting & Coil Processing Machinery
Precision-manufactured in our 40,000 m² Wuxi facility under strict CE directives. High-speed, burr-minimized slitting and precision cut-to-length solutions built for global metal processors.
Continuous Shear
High-Quality Professional Flying Shear Line
Continuous dynamic cutting synced with line speeds up to 120m/min, maximizing sheet volume without start-stop inertia.
View Product Details
Rotary Slitting
China Manufacturer Of Slitting Line
Heavy-duty CNC rotary slitting unit with fast arbor changeover, dynamic loop control, and uniform tension recoiling.
View Product Details
Stress Relief
High Strength Leveling Machine
Multi-roll 4Hi/6Hi configurations calibrated to remove internal stress, coil set, and edge wave in high-yield AHSS coils.
View Product Details
Precision Flattening
Professional Straightening Machine
Sub-millimeter flatness correction for medium-to-thick plates prior to roll forming, stamping, or laser profiling.
View Product Details
Heavy Gauge Plate
Hot Rolled Plate Moving Shear Line
Hydraulic synchronization shearing designed for up to 25mm heavy gauge plates, ensuring square cuts without camber.
View Product Details
Surface Protection
Stainless Steel Uncoiling-Shearing Line
Equipped with PU rubber-coated rolls, automatic PVC film applicators, and scratch-free pneumatic sheet droppers.
View Product Details
Combined CNC Line
HR Coil Combined Slitting & CTL Line
Versatile hybrid processing architecture allowing dual operation modes: edge trim & slitting, or direct high-precision blanking.
View Product Details
Technical White Paper
Next-Gen CNC Slitting: Precision, Automation & Global Procurement Drivers
As advanced high-strength steels (AHSS), thin-gauge electrical silicon steels, and non-ferrous alloys reshape automotive and renewable sectors, the global demand for CE-certified CNC slitting equipment demands unmatched structural rigidity and closed-loop control.
Micron-Tolerance Arbor Rigidity
Modern cold-rolled automotive steels and grain-oriented silicon steels demand blade clearance accuracy within ±0.002 mm. Our CNC slitter heads utilize dual eccentric housings, ultra-rigid alloy forged arbors, and pre-loaded zero-clearance bearings that eliminate dynamic arbor deflection under severe radial loads.
Automated Robotic Tool Setup
Changeover downtime directly degrades operational margin. Jianfa implements CNC automatic knife positioning systems and quick-swap dual swivel head carousels. Tooling setups that once took 45 minutes are compressed to under 4 minutes, ensuring recipe-driven precision and reduced ergonomic risk for line operators.
Rigorous CE Safety Compliance
Global Tier-1 procurement standards require absolute compliance with the European Machinery Directive 2006/42/EC. Our slitting lines integrate category 4 safety PLCs, optical muting light curtains, enclosed recoil safety interlocks, and full electromagnetic compatibility (EMC) shielding.
Manufacturing Infrastructure
China Factory 4.0: Supply Chain Resilience & Cost-to-Performance Leadership
Headquartered in Wuxi, Jiangsu—the premier metallurgical machinery cluster in China's Yangtze River Delta—Wuxi Jianfa merges digital fabrication with four decades of heavy mechanical machining craftsmanship.
100% In-House Vertical Machining
Unlike export trading houses or assemblers reliant on subcontractors, all critical structures—including heavy welded bedplates, stress-relieved annealing frames, slitter arbors, and recoiler drums—are bored, turned, and ground inside our 40,000 m² heavy-duty CNC workshop.
Yangtze River Delta Industrial Density
Wuxi is China's core metallurgical ecosystem. High-grade alloy forgings, hydraulic valves, and servo drives are sourced within a 50-kilometer radius. This immediate supply cluster slashes equipment delivery cycles by 30% compared to Western European machinery manufacturers.
Direct Port Connectivity
Direct expressway access to Shanghai Port and Taicang Port provides simplified break-bulk and flat-rack container logistics. Jianfa engineers oversee anti-corrosion VCI multi-layer packaging, waterproof barrier sealing, and structural sea-fastening calculations for transatlantic transit.
Engineering Matrix
CNC Slitting Line vs. Cut-to-Length Line vs. Flying Shear
Systematic technical comparison to guide procurement teams in matching line kinematics to coil specifications, sheet tolerances, and final customer deliverables.
| System Architecture | CNC Slitting Line | Cut to Length (CTL) Line | High-Speed Flying Shear Line |
|---|---|---|---|
| Primary Finished Output | Multiple precision slit strips wound on recoiler drums | Individual flat sheets or heavy plates neatly stacked | High-throughput flat blanks stacked continuously at speed |
| Cutting Kinematics | Continuous rotary slitting knives on dual arbors | Start-stop stationary shear (hydraulic or mechanical) | Synchronized rotary or moving shear synced to web speed |
| Operational Line Speeds | Up to 150 – 250 m/min | Up to 40 – 80 m/min | Up to 100 – 140 m/min |
| Material Processing Spectrum | CR, HR, GI, PPGI, Stainless, Silicon Steel, Cu, Al | HR plate, CR sheet, Chequered plate, Automotive steel | Automotive skin sheet, Appliance pre-painted, Stainless |
| Strip Tension & Control | Hydraulic loop car, tension pad/belt tensioner, closed-loop | Loop pit or direct leveling roll pull with servo encoder | Continuous non-stop servo loop control with laser measure |
| Downstream Applications | ERW tube mills, roll-formers, motor core stamping | Switchgear boxes, HVAC panels, shipbuilding, general fabricators | Automotive tier-1 blanking, white goods appliance housings |
Application Engineering
Worldwide Industrial Integration & Localized Scenarios
From North American tube mills to European automotive blanking facilities, Jianfa CNC slitting lines adapt to localized operational demands, electrical grids, and alloy behaviors.
Automotive AHSS & EV Battery Strip
High-yield dual-phase (DP980/DP1180) steels require extreme arbor torque and precision knife penetration depth. Jianfa provides CNC hydraulic lock-up slitters that eliminate knife slippage and maintain burr limits below 3% of strip thickness, preventing die wear during downstream deep stamping.
Electrical Steel & Transformer Cores
Slitting grain-oriented electrical steel (CRGO) requires near-zero lateral arbor run-out to eliminate edge stresses that alter magnetic flux. Our ultra-precision tungsten carbide slitter knives and micro-adjustable clearance systems keep hysteresis losses minimal for grid transformer producers.
Heavy-Gauge Structural ERW Tube Mills
For tube mills processing up to 16mm hot-rolled coils, our heavy-duty lines combine cantilever uncoilers with double-cone hydraulic centering, scrap choppers with replaceable 4-sided tool-steel blades, and push-pull recoiler mandrels rated for 35-ton coils.
Quality Assurance
Verified Certifications & Metallurgical Accreditations
Recognized as a National Key Developing Enterprise in China's metallurgical machinery sector. We maintain transparent quality governance, factory pre-acceptance run-offs, and third-party CE audits.
ISO 9001:2015 Registered
CE Machinery Directive 2006/42/EC
Low Voltage Directive 2014/35/EU
EMC Directive 2014/30/EU
National Metallurgical Key Enterprise
Procurement Intelligence
Frequently Asked Questions: CNC Slitting Machine Engineering
Direct answers to the most common engineering, operational, and commercial questions raised by plant directors, maintenance superintendents, and procurement executives.
What coil processing equipment does Wuxi Jianfa design and manufacture? +
We manufacture turnkey coil processing systems: high-precision CNC slitting lines (rotary shear lines), cut to length lines, high-speed flying shear production lines, precision multi-roll leveling machines, plate straightening machines, and continuous hot-dip galvanizing lines. Equipment can be delivered as complete integrated lines or modular individual units to replace bottleneck sections on existing lines.
Which metals and material grades can your CNC slitting lines handle? +
Our CNC slitting lines process hot-rolled mild carbon steel, cold-rolled automotive steels, galvanized (GI/PPGI), electrical silicon steel (CRGO/CRNGO), stainless steel (300/400 series), titanium alloys, copper, brass, and aluminum coils. Material thickness capabilities range from 0.1 mm ultra-thin foil up to 25.0 mm heavy plate, with yield strengths exceeding 1200 MPa.
How do CNC slitting lines ensure burr-free edges and prevent strip camber? +
Edge burr is directly correlated to knife penetration depth, radial arbor deflection, and blade clearance consistency. Jianfa CNC slitters incorporate dual precision eccentric bushings with optical digital readouts and dynamic digital knife overlap controls. Furthermore, our hydraulic loop pits and adjustable multi-zone tension separators eliminate uneven strip tension, ensuring zero strip camber during high-speed recoiling.
What exact parameters should buyers furnish to receive an accurate technical proposal? +
To provide an engineered line layout and precise quotation, our engineers need: (1) Material grade, tensile strength, and yield strength (MPa); (2) Coil thickness range and maximum coil width (mm); (3) Maximum coil weight and inner/outer diameter (ID/OD); (4) Desired slitting schedule (minimum strip width and maximum number of simultaneous cuts); (5) Surface sensitivity requirements; and (6) Target line speed (m/min) alongside plant power characteristics (e.g., 400V/50Hz/3P).
Do you offer global turnkey on-site installation, commissioning, and staff training? +
Yes. Our experienced field engineers oversee site anchoring, mechanical positioning, electrical cable trunking, hydraulic piping flushes, PLC fieldbus commissioning, and trial coil test-runs. We deliver rigorous structured on-site training for customer operators and maintenance teams, backed by lifetime remote PLC diagnostics over encrypted industrial VPN routers.
Can buyers inspect equipment running under power before shipment from Wuxi? +
Yes. We actively encourage comprehensive Factory Acceptance Testing (FAT). Buyers or third-party international inspection bodies (such as SGS, TÜV, or Bureau Veritas) are invited to our 40,000 m² factory in Wuxi, Jiangsu—conveniently situated 35 minutes by high-speed rail from Shanghai—to witness full dry runs and loaded test operations prior to packing and sea transport.
Extended Catalog
Comprehensive Metal Coil Processing Systems
Explore our full line of heavy-gauge slitting units, moving rotary shears, leveling machines, and automated stacking systems ready for global deployment.
Heavy-Duty Slitting
HR Sheet Uncoiling, Slitting & Recoiling Line
Built to slice thick HR mother coils into narrow strips with synchronized edge scrap ballers or scrap choppers.
View Product Details
Mill Supply Grade
HR Uncoiling-Slitting-Recoiling Line
Designed for continuous high-speed strip feeding into structural ERW tube lines and highway barrier cold roll formers.
View Product Details
Automatic Stacking
HR Uncoiling-Leveling-Shearing Line
Combines coarse and fine 4-Hi leveling with high-torque guillotine shears and electromagnetic auto stackers.
View Product Details
Servo Adjustment
High Strength Leveling Unit (6-Hi)
Intermediate back-up rolls eliminate roll print on delicate panels while straightening high-tensile sheet stock.
View Product Details
Rigid Frame
Industrial Straightening Machine
Hardened chrome alloy rolls with centralized motorized gap setting, designed for tough structural plate workshops.
View Product Details
High Throughput
Dynamic Moving Shear Blanking Line
Cuts heavy strip dynamically on the fly, eliminating cycle stop-starts and dramatically raising plate line throughput.
View Product Details
Zero-Marking
Stainless Blanking & Shearing Line
Engineered for 2B, BA, No.4, and mirror finish stainless surfaces, complete with interleave paper rewinding.
View Product Details
High-Tension Drum
Heavy Gauge Coil Slitter Recoiler
Robust hydraulic expanding recoilers with outer support arms for stable winding of thick-gauge steel coils.
View Product Details